We offer a stall system for just about any budget.
Contact us with your job specifications and we will suggest the stall system that is right for you. email us

 

NEW - Portable Horse Stalls 

  • 14 Gauge Galvanized and Powder Coated Steel

  • Straight bar door or Rounded Open Yoke-one piece of round tube, welded at the bottom to the top of bars, no additional welds or sharp edges

  • 1400gsm nylon webbing vinyl

  • 2 pieces of vinyl, one on the outside and one on the inside

  • Vinyl has a 2” thick nylon webbing sewn on the edges where it will screwed into frame

  • Round head screws and washers every 8”

  • 5 layers of foam inside the steel channel

  • Centered swinging doors that are 4’ wide 

  • Hinges are fully welded

  • 10ft x 7ft x 1”

  • Latches are on a plate which is welded to the bars

  • Hook is designed to be “locked” with a standard snap

  • Each panel has 4 horizontal pieces of metal for hanging buckets, hay feeders, halter/lead ropes etc

Front panels are approx. 110lbs each. Side Panels are approx. 90lbs each.

Stall Gates 

Designed to provide maximum visibility and ventilation with dependable security.  They are fabricated using 1" square structural steel tubing and 1/4" steel wire.  25% stronger than equivalent round tubing, these gates are built to last.  A "foal friendly" close mesh profile gives horsemen peace of mind when securing valuable animals.

  • Available with or without a yoke, gates can be chosen for large or small animals

  • Standard width is 52" with 4 convenient heights: 32", 42", 50 1/2" and 62"

  • All models are powder coated in your choice of black or chrome colors

For more information or to order email or call us at 800-467-7321

1000

Classic Equine Integrity Series

The Series 1000 is designed for post frame construction where support posts are required for the roof. All equipment is available in pre-galvanized or powder coat paint. Grills and doors are all solid welded. Doors come with a stop, guide and latch. This system is designed to use 2 x 6" or 2 x 8" construction grade lumber.

Superior solutions; excellent value
• Designed with safety in mind
• Quick and easy to install
• Versatile easy to handle pieces
• Powder coat paint
• All welded construction
• Classic Equine Stalls have multiple door options
• Manufactured from Heavy gauge galvanized and straight steel
• Latch is DVM approved
• 14 ga. premium galvanized steel
• Available in ten powdercoat colors

For a price quote click here
Please include your location and tell us about your project.



C3000

Classic Equine Legend Series

The Series C3000 Custom Stall System is designed to be a permanent This system may be installed with support posts or in a clear span building. Fronts, partitions and doors are pre-welded framed from heavy gauge galvanized steel and can be either pre-galvanized or powder coat painted. The Series C3000 is designed to use standard 2 x 6" or 2 x 8" lumber. Custom lengths available.

• Solid all welded construction
• Manufactured from heavy gauge galvanized and straight steel
• Available as pre-galvanized or powder coat painted
• Doors come with stop, guide and latch
• Unique universal two-way hinged doors open flat against partition
• Special track and rollers for easy opening
• Latch is DVM approved
• Door Options available in both sliding and hinged doors
• 14 ga. premium galvanized steel
• Available in ten powdercoat colors

For a price quote click here
Please include your location and tell us about your project.



L4000

Classic Equine European Series

If you are looking for Classic European styling, the L4000 Series is your stall. Beautiful design and attention to detail set this stall apart from all of the others. Made from premium galvanized heavy-duty steel, the L4000 is available in multiple designs including low or high models with hinged or sliding doors. Designed to accept 5/4 hardwood or construction grade 2 x 6 or 2 x 8 lumber. South American Hardwood available, but not included. Available in ten powdercoat colors.

For a price quote click here
Please include your location and tell us about your project.

DOOR OPTIONS

Classic Equine Door Options

Classic Equine Equip., Inc. has over 18 door options to choose from. We offer the right door for any, requirement. To beautify or for ease of use, we have everything you need for Series KS5000 and Series C3000.

• Excellence for the discriminating horse owner
• Strength and beauty combined
• Designed with horses in mind
• Safeguards against hazards
• Manufactured from heavy gauge galvanized and straight steel
• All welded construction
• Series C3000 stalls have multiple door options
• Powder coat paint
• Latch is DVM approved

We offer the following Stall Door Options:
• Half Grill Door
• Door w/Fold-down Opening
• Door w/Swing-out Opening
• Full Grill Door
• Full Wood Door
• Door w/Yoke Opening
• Stall Gate w/Yoke

For a price quote click here
Please include your location and tell us about your project.

FEED OPTIONS & ACCESSORIES

Classic Equine Feed Options & Accessories

Bucket Holder & Plastic Grain Bowl
Standard Feed Opening
Bucket Holder (Hang-on)
Grilled Feed Door
Swing-out Bucket Holder
Wall Mount Hay Rack
Swing-out Hay Feeder
Swivel Hay and Grain Feeder

For a price quote click here
Please include your location and tell us about your project.

 We also offer:

Dutch Doors/ Barn End Doors  |  Window Grills  |  Exercisers